Free donut SVG

Pile of three donuts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pile of three donuts, as a solid black shape
Pile of three donuts. The preview is the SVG file itself.

An iced donut with sprinkles resting on a drizzled one and a plain glazed ring, like donuts tipped out of a box. A slim cut line sets each in front of the next.

What is in the file

Size100 × 93 mm (3.94 × 3.68 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut30: 1 outer edge and 29 cut-outs
Cut length1,276 mm at this size
Narrowest part1 mm at this size
Nodes252 curve and line segments

Measured from the file. PNG: 2,000 × 1,873 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.25 mm324 mm100Too fine for most machines
2 × 1.87 in (51 × 47 mm)0.51 mm648 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.8 in (76 × 71 mm)0.76 mm972 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.74 in (102 × 95 mm)1 mm1,296 mm6Vinyl, card and thin sheet
6 × 5.6 in (152 × 142 mm)1.5 mm1,945 mm2Vinyl, card and thin sheet
8 × 7.47 in (203 × 190 mm)2 mm2,593 mm1Vinyl, card and thin sheet
12 × 11.21 in (305 × 285 mm)3 mm3,889 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Stack of three donuts All 16 donuts Layered donut in three colours →