Free donut SVG

Donut with dripping icing SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Donut with dripping icing, as a solid black shape
Donut with dripping icing. The preview is the SVG file itself.

Thick icing runs towards the edge in ten rounded drips of different lengths. The drips are outlined by a cut line with four bridges across it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length1,406 mm at this size
Narrowest part1.5 mm at this size
Nodes325 curve and line segments
Also found asDonut drip SVG

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.38 mm357 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.76 mm714 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.1 mm1,071 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.5 mm1,428 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.3 mm2,143 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3 mm2,857 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)4.6 mm4,285 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Sprinkle donut All 16 donuts Donut icing layer →