Sitting dog silhouette SVG
A dog sitting upright in profile with a drop ear, a long muzzle and its tail out behind. Thin slits mark the ear, the eye and the thigh; everything else is solid.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 96 × 100 mm (3.79 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 540 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 172 curve and line segments |
Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | 0.97 mm | 137 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.93 × 2 in (49 × 51 mm) | 1.9 mm | 274 mm | 25 | Vinyl, card and thin sheet |
| 2.89 × 3 in (73 × 76 mm) | 2.9 mm | 411 mm | 9 | Vinyl, card and thin sheet |
| 3.85 × 4 in (98 × 102 mm) | 3.9 mm | 549 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.78 × 6 in (147 × 152 mm) | 5.8 mm | 823 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.7 × 8 in (196 × 203 mm) | 7.7 mm | 1,097 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.56 × 12 in (294 × 305 mm) | 12 mm | 1,646 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.