Free dog SVG

Dachshund sausage dog SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dachshund sausage dog, as a solid black shape
Dachshund sausage dog. The preview is the SVG file itself.

The long dog: a low body on four short legs, a long ear, a long nose and a tail in the air. It is well over twice as wide as it is tall, so it suits mugs and banners.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length353 mm at this size
Narrowest part1.7 mm at this size
Nodes130 curve and line segments

Measured from the file. PNG: 2,000 × 900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.43 mm90 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.86 mm179 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.28 in (76 × 33 mm)1.3 mm269 mm24Vinyl, card and thin sheet
4 × 1.71 in (102 × 43 mm)1.7 mm359 mm12Vinyl, card and thin sheet
6 × 2.57 in (152 × 65 mm)2.6 mm538 mm4Vinyl, card and thin sheet
8 × 3.42 in (203 × 87 mm)3.5 mm717 mm3Any material, including 3 mm wood and acrylic
12 × 5.14 in (305 × 130 mm)5.2 mm1,076 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog SVG files

← Labrador dog standing All 17 dogs Corgi dog standing →