Cute puppy dog sitting SVG
A puppy facing you with a big head, floppy ears, a small body, front paws together and a wagging tail. The face is cut through and the puppy is one piece.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 77 × 100 mm (3.02 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 698 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 190 curve and line segments |
Measured from the file. PNG: 1,552 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.77 × 1 in (19 × 25 mm) | 0.66 mm | 177 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.53 × 2 in (39 × 51 mm) | 1.3 mm | 355 mm | 35 | Vinyl, card and thin sheet |
| 2.3 × 3 in (58 × 76 mm) | 2 mm | 532 mm | 12 | Vinyl, card and thin sheet |
| 3.07 × 4 in (78 × 102 mm) | 2.6 mm | 709 mm | 6 | Vinyl, card and thin sheet |
| 4.6 × 6 in (117 × 152 mm) | 4 mm | 1,064 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.14 × 8 in (156 × 203 mm) | 5.3 mm | 1,418 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.2 × 12 in (234 × 305 mm) | 7.9 mm | 2,128 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Peeking dog 
Bulldog face 
Husky dog face with a mask 
Corgi dog butt 
Dog mandala face 
Dog in a heart 
Dog outline 
Dog face with a bandana 