Free dog SVG

Dog outline SVG

Dog outline, drawn as a line — Dog outline. The preview is the SVG file itself.

The sitting dog drawn as one even line about 2 mm wide in a closed loop, with nothing inside. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	96 × 100 mm (3.79 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	769 mm at this size
Narrowest part	2.5 mm at this size
Nodes	252 curve and line segments

Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.96 × 1 in (24 × 25 mm)	0.64 mm	195 mm	100	Fine detail: vinyl and paper only, weed with care
1.93 × 2 in (49 × 51 mm)	1.3 mm	391 mm	25	Vinyl, card and thin sheet
2.89 × 3 in (73 × 76 mm)	1.9 mm	586 mm	9	Vinyl, card and thin sheet
3.85 × 4 in (98 × 102 mm)	2.5 mm	781 mm	6	Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)	3.8 mm	1,172 mm	2	Any material, including 3 mm wood and acrylic
7.7 × 8 in (196 × 203 mm)	5.1 mm	1,563 mm	1	Any material, including 3 mm wood and acrylic
11.56 × 12 in (294 × 305 mm)	7.6 mm	2,344 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog SVG files

← Dog in a heart All 17 dogs Dog face with a bandana →