Free dog SVG

Happy dog face SVG

Happy dog face, as a solid black shape — Happy dog face. The preview is the SVG file itself.

A dog looking straight at you: floppy ears, shining eyes, a big nose and an open mouth with the tongue showing. The features are cut through and the face is one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 74 mm (3.94 × 2.9 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	621 mm at this size
Narrowest part	3.4 mm at this size
Nodes	127 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,494 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.74 in (25 × 19 mm)	0.86 mm	158 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.47 in (51 × 37 mm)	1.7 mm	315 mm	35	Vinyl, card and thin sheet
3 × 2.21 in (76 × 56 mm)	2.6 mm	473 mm	15	Vinyl, card and thin sheet
4 × 2.95 in (102 × 75 mm)	3.5 mm	631 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.42 in (152 × 112 mm)	5.2 mm	946 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.9 in (203 × 150 mm)	6.9 mm	1,262 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.84 in (305 × 225 mm)	10 mm	1,893 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog SVG files

← Sitting dog silhouette All 17 dogs Labrador dog standing →