Free dog SVG

Corgi dog standing SVG

Corgi dog standing, as a solid black shape — Corgi dog standing. The preview is the SVG file itself.

A corgi in profile: big upright ears, a foxy muzzle, a deep chest, a fluffy rump with no tail and very short legs.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.38 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	433 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	141 curve and line segments

Measured from the file. PNG: 2,000 × 1,727 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	Over 1.5 mm	110 mm	110	Vinyl, card and thin sheet
2 × 1.72 in (51 × 44 mm)	Over 3 mm	220 mm	30	Any material, including 3 mm wood and acrylic
3 × 2.57 in (76 × 65 mm)	Over 4.6 mm	330 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.43 in (102 × 87 mm)	Over 6.1 mm	440 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.15 in (152 × 131 mm)	Over 9.1 mm	660 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.86 in (203 × 174 mm)	Over 12 mm	880 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.3 in (305 × 262 mm)	Over 18 mm	1,320 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog SVG files

← Dachshund sausage dog All 17 dogs Poodle dog with pompoms →