Peeking dog SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The top of a dog face looking over a ledge, ears hanging down either side and two paws hooked over the edge. For car windows, mugs and the corner of a card.
What is in the file
| Size | 100 × 48 mm (3.94 × 1.89 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 572 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 121 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,002 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.48 in (25 × 12 mm) | 0.28 mm | 145 mm | 170 | Too fine for most machines |
| 2 × 0.96 in (51 × 24 mm) | 0.56 mm | 291 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.44 in (76 × 37 mm) | 0.84 mm | 436 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.92 in (102 × 49 mm) | 1.1 mm | 581 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.89 in (152 × 73 mm) | 1.7 mm | 872 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.85 in (203 × 98 mm) | 2.2 mm | 1,162 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.77 in (305 × 147 mm) | 3.4 mm | 1,743 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.