Free dog SVG

Dog house with a bone SVG

Dog house with a bone, as a solid black shape
Dog house with a bone. The preview is the SVG file itself.

A kennel with a pitched roof, an arched doorway and a bone over the door. A sign shape: put a name under the bone or hang a lead from it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length580 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes71 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,998 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm147 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm295 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm442 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (101 × 102 mm)Over 6.1 mm589 mm4Any material, including 3 mm wood and acrylic
5.99 × 6 in (152 × 152 mm)Over 9.1 mm884 mm1Any material, including 3 mm wood and acrylic
7.99 × 8 in (203 × 203 mm)Over 12 mm1,179 mm1Any material, including 3 mm wood and acrylic
11.99 × 12 in (304 × 305 mm)Over 18 mm1,768 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog SVG files

← Dog face with a bandana All 17 dogs Dog and cat sitting together →