Labrador dog standing SVG
A retriever standing square in profile with its tail level and its head up. A sturdy shape with thick legs, good for signs, leash hooks and wood.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.61 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 486 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 159 curve and line segments |
Measured from the file. PNG: 2,000 × 1,352 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.71 mm | 123 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.33 in (51 × 34 mm) | 1.4 mm | 247 mm | 35 | Vinyl, card and thin sheet |
| 3 × 1.99 in (76 × 51 mm) | 2.1 mm | 370 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.65 in (102 × 67 mm) | 2.8 mm | 494 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.98 in (152 × 101 mm) | 4.3 mm | 741 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.3 in (203 × 135 mm) | 5.7 mm | 988 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.96 in (305 × 202 mm) | 8.5 mm | 1,481 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Dachshund sausage dog 
Corgi dog standing 
Poodle dog with pompoms 
Cute puppy dog sitting 
Peeking dog 
Bulldog face 
Husky dog face with a mask 
Corgi dog butt 