Doe deer head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A doe seen from the front: wide ears with the insides cut out, soft eyes and a small nose, with no antlers and no shoulders. A gentle face for cards and nursery prints.
What is in the file
| Size | 100 × 81 mm (3.94 × 3.2 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 525 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 111 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,642 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.81 in (25 × 21 mm) | 0.58 mm | 133 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.63 in (51 × 41 mm) | 1.2 mm | 267 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.44 in (76 × 62 mm) | 1.8 mm | 400 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.26 in (102 × 83 mm) | 2.3 mm | 533 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.88 in (152 × 124 mm) | 3.5 mm | 800 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.51 in (203 × 165 mm) | 4.7 mm | 1,067 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.77 in (305 × 248 mm) | 7 mm | 1,600 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.