Free deer SVG

Deer scene in a ring SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Deer scene in a ring, as a solid black shape
Deer scene in a ring. The preview is the SVG file itself.

A buck on a hill between two pine trees, set inside a ring. The trees and the hill are welded to the ring, so the whole scene is one piece. For ornaments and cabin signs.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,171 mm at this size
Narrowest part1.2 mm at this size
Nodes297 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.3 mm297 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.61 mm595 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.91 mm892 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1.2 mm1,190 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.8 mm1,785 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2.4 mm2,379 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3.7 mm3,569 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More deer SVG files

← Buck and doe deer All 18 deer Deer tracks →