Free deer SVG

Single deer antler SVG

Single deer antler, as a solid black shape — Single deer antler. The preview is the SVG file itself.

One shed antler lying on its side: a curved main beam with four tines standing up from it. For rustic place cards, key racks and cabin decor.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 51 mm (3.94 × 2.01 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	447 mm at this size
Narrowest part	5.2 mm at this size
Nodes	97 curve and line segments

Measured from the file. PNG: 2,000 × 1,060 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.51 in (25 × 13 mm)	1.3 mm	114 mm	170	Vinyl, card and thin sheet
2 × 1.02 in (51 × 26 mm)	2.6 mm	227 mm	45	Vinyl, card and thin sheet
3 × 1.53 in (76 × 39 mm)	4 mm	341 mm	21	Any material, including 3 mm wood and acrylic
4 × 2.04 in (102 × 52 mm)	5.3 mm	454 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.07 in (152 × 78 mm)	7.9 mm	681 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.09 in (203 × 104 mm)	11 mm	908 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.13 in (305 × 156 mm)	16 mm	1,362 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More deer SVG files

← Deer antlers All 18 deer Deer rack on a skull plate →