Leaping stag deer SVG
A stag in full flight: front legs tucked, back legs driving, neck stretched and antlers laid back. Long and low, for mantel signs and the tops of banners.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 96 × 100 mm (3.78 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 585 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 211 curve and line segments |
Measured from the file. PNG: 1,925 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | 0.58 mm | 149 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.92 × 2 in (49 × 51 mm) | 1.2 mm | 297 mm | 25 | Vinyl, card and thin sheet |
| 2.88 × 3 in (73 × 76 mm) | 1.8 mm | 446 mm | 9 | Vinyl, card and thin sheet |
| 3.84 × 4 in (98 × 102 mm) | 2.3 mm | 594 mm | 6 | Vinyl, card and thin sheet |
| 5.77 × 6 in (146 × 152 mm) | 3.5 mm | 892 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.69 × 8 in (195 × 203 mm) | 4.7 mm | 1,189 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.53 × 12 in (293 × 305 mm) | 7 mm | 1,783 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Doe deer head 
Deer skull with antlers 
Deer head in a heart 
Buck and doe deer 
Deer scene in a ring 
Deer tracks 
Deer outline 
Buck deer standing 