Buck and doe deer SVG
A buck and a doe standing together on a strip of ground, the doe a little in front. The strip joins them into one piece. For wedding and anniversary signs.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 950 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 350 curve and line segments |
Measured from the file. PNG: 2,000 × 1,902 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.46 mm | 241 mm | 100 | Too fine for most machines |
| 2 × 1.9 in (51 × 48 mm) | 0.91 mm | 483 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.85 in (76 × 72 mm) | 1.4 mm | 724 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.8 in (102 × 96 mm) | 1.8 mm | 965 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.69 in (152 × 145 mm) | 2.7 mm | 1,448 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.59 in (203 × 193 mm) | 3.7 mm | 1,930 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.39 in (305 × 289 mm) | 5.5 mm | 2,896 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Deer scene in a ring 
Deer tracks 
Deer outline 
Buck deer standing 
Deer head with antlers 
Deer antlers 
Single deer antler 
Deer rack on a skull plate 