Free deer SVG

Buck deer standing SVG

Buck deer standing, as a solid black shape — Buck deer standing. The preview is the SVG file itself.

A whitetail buck in profile: a full rack of antlers, two big ears, a slender body on long legs and a short tail. Solid apart from a dot for the eye. For cabin signs and hunting gifts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	587 mm at this size
Narrowest part	2 mm at this size
Nodes	223 curve and line segments

Measured from the file. PNG: 1,408 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	0.51 mm	149 mm	130	Fine detail: vinyl and paper only, weed with care
1.38 × 2 in (35 × 51 mm)	1 mm	298 mm	35	Vinyl, card and thin sheet
2.08 × 3 in (53 × 76 mm)	1.5 mm	447 mm	15	Vinyl, card and thin sheet
2.77 × 4 in (70 × 102 mm)	2 mm	596 mm	8	Vinyl, card and thin sheet
4.15 × 6 in (105 × 152 mm)	3 mm	895 mm	2	Any material, including 3 mm wood and acrylic
5.54 × 8 in (141 × 203 mm)	4.1 mm	1,193 mm	2	Any material, including 3 mm wood and acrylic
8.3 × 12 in (211 × 305 mm)	6.1 mm	1,789 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More deer SVG files

← Deer outline All 18 deer Deer head with antlers →