Doe deer standing SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A doe in profile, alert, with no antlers: big ears, a long neck, slim legs and a short tail. Pair her with the buck, or use her alone for a softer woodland look.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 93 × 100 mm (3.68 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 594 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 157 curve and line segments |
Measured from the file. PNG: 1,873 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.93 × 1 in (24 × 25 mm) | 0.61 mm | 151 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.87 × 2 in (47 × 51 mm) | 1.2 mm | 302 mm | 25 | Vinyl, card and thin sheet |
| 2.8 × 3 in (71 × 76 mm) | 1.8 mm | 453 mm | 12 | Vinyl, card and thin sheet |
| 3.74 × 4 in (95 × 102 mm) | 2.4 mm | 604 mm | 6 | Vinyl, card and thin sheet |
| 5.6 × 6 in (142 × 152 mm) | 3.7 mm | 905 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.47 × 8 in (190 × 203 mm) | 4.9 mm | 1,207 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.21 × 12 in (285 × 305 mm) | 7.3 mm | 1,811 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.