Free deer SVG

Deer head silhouette SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Deer head silhouette, as a solid black shape
Deer head silhouette. The preview is the SVG file itself.

A buck head and neck in side view, facing left, with both antlers showing. A solid shape with only the eye cut out, for stencils, decals and gun cabinet glass.

What is in the file

Size60 × 100 mm (2.34 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length509 mm at this size
Narrowest part1 mm at this size
Nodes142 curve and line segments

Measured from the file. PNG: 1,221 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.6 × 1 in (15 × 25 mm)0.25 mm129 mm150Too fine for most machines
1.19 × 2 in (30 × 51 mm)0.51 mm259 mm40Fine detail: vinyl and paper only, weed with care
1.78 × 3 in (45 × 76 mm)0.76 mm388 mm18Fine detail: vinyl and paper only, weed with care
2.38 × 4 in (60 × 102 mm)1 mm517 mm8Vinyl, card and thin sheet
3.57 × 6 in (91 × 152 mm)1.5 mm776 mm3Vinyl, card and thin sheet
4.76 × 8 in (121 × 203 mm)2 mm1,034 mm2Vinyl, card and thin sheet
7.14 × 12 in (181 × 305 mm)3 mm1,551 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More deer SVG files

← Floral deer antlers All 18 deer Doe deer standing →