Free deer SVG

Deer head with antlers SVG

Deer head with antlers, as a solid black shape — Deer head with antlers. The preview is the SVG file itself.

A buck seen from the front: a rack with three tines a side, ears held out, a long nose and the neck and shoulders below, like a mount on a wall. One piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	63 × 100 mm (2.46 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	777 mm at this size
Narrowest part	2.4 mm at this size
Nodes	265 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,281 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.63 × 1 in (16 × 25 mm)	0.61 mm	197 mm	140	Fine detail: vinyl and paper only, weed with care
1.25 × 2 in (32 × 51 mm)	1.2 mm	395 mm	40	Vinyl, card and thin sheet
1.88 × 3 in (48 × 76 mm)	1.8 mm	592 mm	15	Vinyl, card and thin sheet
2.5 × 4 in (64 × 102 mm)	2.4 mm	789 mm	8	Vinyl, card and thin sheet
3.76 × 6 in (95 × 152 mm)	3.7 mm	1,184 mm	3	Any material, including 3 mm wood and acrylic
5.01 × 8 in (127 × 203 mm)	4.9 mm	1,579 mm	2	Any material, including 3 mm wood and acrylic
7.51 × 12 in (191 × 305 mm)	7.3 mm	2,368 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More deer SVG files

← Buck deer standing All 18 deer Deer antlers →