Free deer SVG

Deer outline SVG

Deer outline, drawn as a line — Deer outline. The preview is the SVG file itself.

The standing buck drawn as one even line about 2 mm wide in a closed loop, antlers and all. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	70 × 100 mm (2.74 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	1,057 mm at this size
Narrowest part	1.5 mm at this size
Nodes	429 curve and line segments

Measured from the file. PNG: 1,413 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.7 × 1 in (18 × 25 mm)	0.38 mm	268 mm	130	Too fine for most machines
1.39 × 2 in (35 × 51 mm)	0.76 mm	537 mm	35	Fine detail: vinyl and paper only, weed with care
2.09 × 3 in (53 × 76 mm)	1.1 mm	805 mm	15	Vinyl, card and thin sheet
2.78 × 4 in (71 × 102 mm)	1.5 mm	1,074 mm	8	Vinyl, card and thin sheet
4.17 × 6 in (106 × 152 mm)	2.3 mm	1,611 mm	2	Vinyl, card and thin sheet
5.56 × 8 in (141 × 203 mm)	3 mm	2,148 mm	2	Any material, including 3 mm wood and acrylic
8.34 × 12 in (212 × 305 mm)	4.6 mm	3,222 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More deer SVG files

← Deer tracks All 18 deer Buck deer standing →