Free bull SVG

Bull outline SVG

Bull outline, drawn as a line — Bull outline. The preview is the SVG file itself.

The standing bull drawn as one even line about 2 mm wide: horns, crest, dewlap, hooves and tail, with the gaps between the legs left open. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	971 mm at this size
Narrowest part	1.9 mm at this size
Nodes	445 curve and line segments

Measured from the file. PNG: 2,000 × 1,325 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.48 mm	247 mm	140	Too fine for most machines
2 × 1.3 in (51 × 33 mm)	0.97 mm	493 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.95 in (76 × 49 mm)	1.4 mm	740 mm	15	Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)	1.9 mm	987 mm	8	Vinyl, card and thin sheet
6 × 3.89 in (152 × 99 mm)	2.9 mm	1,480 mm	2	Vinyl, card and thin sheet
8 × 5.19 in (203 × 132 mm)	3.9 mm	1,973 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.79 in (305 × 198 mm)	5.8 mm	2,960 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bull SVG files

← Bull monogram frame All 14 bulls Layered bull badge in four colours →