Layered bull badge in four colours SVG
Four layers to stack: a mustard disc, a brown head whose horns stand clear of it, cream horn tips and muzzle, and the dark eyes, brows, nostrils and nose ring on top.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.93 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 15: 14 outer edges and 1 cut-out |
| Cut length | 1,248 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 274 curve and line segments |
| Layers | 4: disc, head, horn tips and muzzle and eyes, nose and ring |
Measured from the file. PNG: 2,000 × 1,994 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | Over 1.5 mm | 317 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.99 in (51 × 51 mm) | Over 3 mm | 634 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 2.99 in (76 × 76 mm) | Over 4.6 mm | 951 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 3.99 in (102 × 101 mm) | Over 6.1 mm | 1,268 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 5.98 in (152 × 152 mm) | Over 9.1 mm | 1,902 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 7.98 in (203 × 203 mm) | Over 12 mm | 2,536 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.96 in (305 × 304 mm) | Over 18 mm | 3,804 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.