Free bull SVG

Bull face with a nose ring SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bull face with a nose ring, as a solid black shape
Bull face with a nose ring. The preview is the SVG file itself.

A bull looking straight at you: horns out and up, ears below them, a curly forelock, heavy brows and a ring through the nose. Exactly symmetrical, for ranch signs, barn doors and shirts.

What is in the file

Size100 × 94 mm (3.94 × 3.71 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length712 mm at this size
Narrowest part1 mm at this size
Nodes260 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,890 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.94 in (25 × 24 mm)0.25 mm181 mm100Too fine for most machines
2 × 1.89 in (51 × 48 mm)0.51 mm362 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.83 in (76 × 72 mm)0.76 mm543 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.77 in (102 × 96 mm)1 mm723 mm6Vinyl, card and thin sheet
6 × 5.66 in (152 × 144 mm)1.5 mm1,085 mm2Vinyl, card and thin sheet
8 × 7.54 in (203 × 192 mm)2 mm1,447 mm1Vinyl, card and thin sheet
12 × 11.32 in (305 × 287 mm)3 mm2,170 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bull SVG files

← Layered bull badge in four colours All 14 bulls Bull silhouette →