Free bull SVG

Bull silhouette SVG

Bull silhouette, as a solid black shape — Bull silhouette. The preview is the SVG file itself.

A bull standing square in profile: a crest of muscle over the neck, a dewlap, short horns, a deep chest on short legs and a tail with a tuft. A solid shape with nothing to weed.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size	100 × 65 mm (3.94 × 2.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	536 mm at this size
Narrowest part	2.6 mm at this size
Nodes	244 curve and line segments

Measured from the file. PNG: 2,000 × 1,325 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 16 mm)	0.66 mm	136 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.3 in (51 × 33 mm)	1.3 mm	272 mm	40	Vinyl, card and thin sheet
3 × 1.95 in (76 × 49 mm)	2 mm	408 mm	15	Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)	2.6 mm	545 mm	8	Vinyl, card and thin sheet
6 × 3.89 in (152 × 99 mm)	4 mm	817 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.19 in (203 × 132 mm)	5.3 mm	1,089 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.79 in (305 × 198 mm)	7.9 mm	1,634 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bull SVG files

← Layered bull badge in four colours All 14 bulls Charging bull →