Brahma bull SVG
A Brahma bull in profile: a tall hump over the shoulders, long drooping ears, a deep dewlap swinging under the neck and horns that point up and back. Solid, with an eye.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.61 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 544 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 237 curve and line segments |
Measured from the file. PNG: 2,000 × 1,354 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.66 mm | 138 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.33 in (51 × 34 mm) | 1.3 mm | 276 mm | 35 | Vinyl, card and thin sheet |
| 3 × 1.99 in (76 × 51 mm) | 2 mm | 415 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.66 in (102 × 67 mm) | 2.6 mm | 553 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.98 in (152 × 101 mm) | 4 mm | 829 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.31 in (203 × 135 mm) | 5.3 mm | 1,105 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.97 in (305 × 202 mm) | 7.9 mm | 1,658 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Angus bull 
Bull monogram frame 
Bull outline 
Layered bull badge in four colours 
Bull silhouette 
Charging bull 
Bucking bull 
Bull riding cowboy 