Free bull SVG

Bull monogram frame SVG

Bull monogram frame, as a solid black shape — Bull monogram frame. The preview is the SVG file itself.

A round frame with the bull face welded to the top of the ring, its horns standing above it, and the middle left empty. Add an initial or a ranch name so that it touches the ring, and weld.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.84 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	691 mm at this size
Narrowest part	1.9 mm at this size
Nodes	200 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,465 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	0.48 mm	176 mm	130	Too fine for most machines
1.44 × 2 in (37 × 51 mm)	0.97 mm	351 mm	35	Fine detail: vinyl and paper only, weed with care
2.17 × 3 in (55 × 76 mm)	1.4 mm	527 mm	15	Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)	1.9 mm	702 mm	6	Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)	2.9 mm	1,053 mm	2	Vinyl, card and thin sheet
5.78 × 8 in (147 × 203 mm)	3.9 mm	1,404 mm	2	Any material, including 3 mm wood and acrylic
8.66 × 12 in (220 × 305 mm)	5.8 mm	2,106 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bull SVG files

← Angus bull All 14 bulls Bull outline →