Bull riding cowboy SVG
A cowboy sitting back on a bucking bull with one arm thrown up for balance and his hat still on. Rider and bull are welded into one piece for rodeo shirts and signs.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 94 mm (3.94 × 3.7 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 513 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 284 curve and line segments |
Measured from the file. PNG: 2,000 × 1,883 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.94 in (25 × 24 mm) | 0.64 mm | 130 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.88 in (51 × 48 mm) | 1.3 mm | 261 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.82 in (76 × 72 mm) | 1.9 mm | 391 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.76 in (102 × 95 mm) | 2.5 mm | 521 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.63 in (152 × 143 mm) | 3.8 mm | 782 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.51 in (203 × 191 mm) | 5.1 mm | 1,042 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.27 in (305 × 286 mm) | 7.6 mm | 1,564 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bull head from the side 
Bull face with a nose ring 
Bull horns 
Floral bull skull 
Boho bull skull with feathers 
Brahma bull 
Angus bull 
Bull monogram frame 