Free bull SVG

Floral bull skull SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Floral bull skull, as a solid black shape
Floral bull skull. The preview is the SVG file itself.

A bull skull from the front with three roses and four leaves across the brow between the horns. The roses are cut with a spiral of petal lines. For western shirts, signs and tumblers.

What is in the file

Size100 × 93 mm (3.94 × 3.66 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length945 mm at this size
Narrowest part1 mm at this size
Nodes411 curve and line segments

Measured from the file. PNG: 2,000 × 1,863 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.25 mm240 mm100Too fine for most machines
2 × 1.86 in (51 × 47 mm)0.51 mm480 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.79 in (76 × 71 mm)0.76 mm720 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.72 in (102 × 94 mm)1 mm960 mm6Vinyl, card and thin sheet
6 × 5.57 in (152 × 142 mm)1.5 mm1,440 mm2Vinyl, card and thin sheet
8 × 7.43 in (203 × 189 mm)2 mm1,920 mm1Vinyl, card and thin sheet
12 × 11.15 in (305 × 283 mm)3 mm2,880 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bull SVG files

← Bull horns All 14 bulls Boho bull skull with feathers →