Bucking bull SVG
A rodeo bull with its hind legs kicked high, its front hooves planted and its head tucked down. No rider, so it suits a ranch sign, a buckle design or a shirt back.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 94 mm (3.94 × 3.7 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 420 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 220 curve and line segments |
Measured from the file. PNG: 2,000 × 1,883 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.94 in (25 × 24 mm) | 0.64 mm | 107 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.88 in (51 × 48 mm) | 1.3 mm | 213 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.82 in (76 × 72 mm) | 1.9 mm | 320 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.76 in (102 × 95 mm) | 2.5 mm | 427 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.63 in (152 × 143 mm) | 3.8 mm | 640 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.51 in (203 × 191 mm) | 5.1 mm | 853 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.27 in (305 × 286 mm) | 7.6 mm | 1,280 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bull riding cowboy 
Bull head from the side 
Bull face with a nose ring 
Bull horns 
Floral bull skull 
Boho bull skull with feathers 
Brahma bull 
Angus bull 