Free bridge SVG

Bridge in a ring with fir trees SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bridge in a ring with fir trees, as a solid black shape
Bridge in a ring with fir trees. The preview is the SVG file itself.

A footbridge crossing a pond from bank to bank inside a ring, with a fir at each end and the sun above. Everything touches the ring, so it lifts as one piece.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,205 mm at this size
Narrowest part1 mm at this size
Nodes199 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm306 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm612 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm918 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm1,224 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm1,836 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm2,449 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm3,673 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bridge SVG files

← Rainbow bridge with paw prints All 13 bridges Footbridge outline →