Free bridge SVG

Rainbow bridge with paw prints SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rainbow bridge with paw prints, as a solid black shape
Rainbow bridge with paw prints. The preview is the SVG file itself.

A rainbow of three bands rising from a cloud at each side over a small footbridge, with a paw print cut into each cloud. Drawn for pet memorial cards, frames and ornaments.

What is in the file

Size100 × 59 mm (3.94 × 2.33 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut28: 1 outer edge and 27 cut-outs
Cut length980 mm at this size
Narrowest part1.2 mm at this size
Nodes142 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,217 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.3 mm249 mm150Too fine for most machines
2 × 1.19 in (51 × 30 mm)0.61 mm498 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.78 in (76 × 45 mm)0.91 mm747 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.37 in (102 × 60 mm)1.2 mm996 mm8Vinyl, card and thin sheet
6 × 3.56 in (152 × 90 mm)1.8 mm1,494 mm3Vinyl, card and thin sheet
8 × 4.74 in (203 × 120 mm)2.4 mm1,991 mm2Vinyl, card and thin sheet
12 × 7.12 in (305 × 181 mm)3.7 mm2,987 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bridge SVG files

← Moon bridge with its reflection All 13 bridges Bridge in a ring with fir trees →