Arched footbridge with railings SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A garden footbridge: a curved deck with nine posts, a handrail and a mid rail, ball caps on the end posts, a grassy bank and bulrushes at each end and water underneath.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 44 mm (3.94 × 1.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 885 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 200 curve and line segments |
| Also found as | Small bridge SVG |
Measured from the file. PNG: 2,000 × 925 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.44 in (25 × 11 mm) | 0.56 mm | 225 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.88 in (51 × 22 mm) | 1.1 mm | 450 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.32 in (76 × 34 mm) | 1.7 mm | 674 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.76 in (102 × 45 mm) | 2.2 mm | 899 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.65 in (152 × 67 mm) | 3.4 mm | 1,349 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.53 in (203 × 90 mm) | 4.5 mm | 1,798 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.29 in (305 × 134 mm) | 6.7 mm | 2,697 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More bridge SVG files
-
Stone bridge with three arches Solid · one piece
-
Humpback bridge silhouette Solid · one piece
-
Covered bridge over a creek Solid · one piece
-
Suspension bridge with two towers Solid · one piece
-
Cable-stayed bridge with one mast Solid · one piece
-
Truss bridge on stone piers Solid · one piece
-
Rope bridge between two cliffs Solid · one piece
-
Moon bridge with its reflection Solid · one piece
← Layered stone bridge in five colours All 13 bridges Stone bridge with three arches →