Free bridge SVG

Stone bridge with three arches SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stone bridge with three arches, as a solid black shape
Stone bridge with three arches. The preview is the SVG file itself.

An old stone road bridge: a wide middle arch and a smaller one each side, a coping along the gently humped top with a pillar at each end, a few stone joints and a course line.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 56 mm (3.94 × 2.2 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length841 mm at this size
Narrowest part1.2 mm at this size
Nodes190 curve and line segments
SymmetryMirror
Also found asBridge clipart SVG

Measured from the file. PNG: 2,000 × 1,150 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.3 mm214 mm160Too fine for most machines
2 × 1.12 in (51 × 28 mm)0.61 mm427 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.67 in (76 × 43 mm)0.91 mm641 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.23 in (102 × 57 mm)1.2 mm854 mm10Vinyl, card and thin sheet
6 × 3.35 in (152 × 85 mm)1.8 mm1,282 mm3Vinyl, card and thin sheet
8 × 4.46 in (203 × 113 mm)2.4 mm1,709 mm2Vinyl, card and thin sheet
12 × 6.7 in (305 × 170 mm)3.7 mm2,563 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bridge SVG files

← Arched footbridge with railings All 13 bridges Humpback bridge silhouette →