Free bridge SVG

Cable-stayed bridge with one mast SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cable-stayed bridge with one mast, as a solid black shape
Cable-stayed bridge with one mast. The preview is the SVG file itself.

A modern bridge with a single tall mast and six straight stays fanning to the deck on each side. The stays are about 1.7 mm wide when the bridge is 100 mm long.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,340 mm at this size
Narrowest part1.8 mm at this size
Nodes156 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.46 mm340 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.91 mm681 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)1.4 mm1,021 mm12Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)1.8 mm1,361 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)2.7 mm2,042 mm2Vinyl, card and thin sheet
8 × 7.23 in (203 × 184 mm)3.7 mm2,723 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)5.5 mm4,084 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bridge SVG files

← Suspension bridge with two towers All 13 bridges Truss bridge on stone piers →