Free bridge SVG

Suspension bridge with two towers SVG

Suspension bridge with two towers, as a solid black shape
Suspension bridge with two towers. The preview is the SVG file itself.

A suspension bridge in elevation: two tapering towers, a main cable sweeping down between and beyond them, thirteen hangers, a level deck and an anchor block at each end.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 84 mm (3.94 × 3.3 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut22: 1 outer edge and 21 cut-outs
Cut length1,412 mm at this size
Narrowest part2.5 mm at this size
Nodes285 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,687 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.64 mm359 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.67 in (51 × 43 mm)1.3 mm717 mm30Vinyl, card and thin sheet
3 × 2.51 in (76 × 64 mm)1.9 mm1,076 mm12Vinyl, card and thin sheet
4 × 3.35 in (102 × 85 mm)2.5 mm1,435 mm6Vinyl, card and thin sheet
6 × 5.02 in (152 × 128 mm)3.8 mm2,152 mm2Any material, including 3 mm wood and acrylic
8 × 6.7 in (203 × 170 mm)5.1 mm2,869 mm1Any material, including 3 mm wood and acrylic
12 × 10.04 in (305 × 255 mm)7.6 mm4,304 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bridge SVG files

← Covered bridge over a creek All 13 bridges Cable-stayed bridge with one mast →