3D snowflake in three slotted pieces SVG
Three snowflakes that cross on one axis, sixty degrees apart. Each is solid along a different third of the axis: slide the middle piece up into the first, then the last up into both. Cut 300 mm tall, each is 165 mm tall with slots 2.6 mm wide, for 2 mm board. Loose pieces.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.93 × 3.94 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 3 outlines |
| Cut length | 1,241 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 322 curve and line segments |
Measured from the file. PNG: 1,998 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.76 mm | 315 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.5 mm | 630 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 2.3 mm | 946 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (101 × 102 mm) | 3 mm | 1,261 mm | 4 | Any material, including 3 mm wood and acrylic |
| 5.99 × 6 in (152 × 152 mm) | 4.6 mm | 1,891 mm | 1 | Any material, including 3 mm wood and acrylic |
| 7.99 × 8 in (203 × 203 mm) | 6.1 mm | 2,522 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.99 × 12 in (304 × 305 mm) | 9.1 mm | 3,783 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D snowflake SVG files
-
Simple 3D snowflake for small hands Solid · 2 pieces -
3D snowflake ornaments: two on one sheet Solid · 4 pieces -
3D snowflake arm from a slit square Solid · one piece -
3D snowflake to fold into relief Solid · one piece -
3D snowflake ball from folded halves Solid · one piece -
3D snowflake on a slotted stand Solid · 2 pieces -
3D snowflake arm to print and cut by hand Outline · 7 pieces -
3D snowflake in three stacked layers Layered · 3 pieces
← 3D snowflake in two slotted pieces All 10 3D snowflakes Simple 3D snowflake for small hands →