Simple 3D snowflake for small hands SVG
A two-piece slotted snowflake with thick arms and one pair of twigs on each, so nothing snaps in card or craft foam. Each piece is slotted from one arm tip to its middle. Cut 200 mm tall, each is 105 mm across with a slot 2.1 mm wide, right for 2 mm foam or board. Loose pieces.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 52 × 100 mm (2.06 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 2 outlines |
| Cut length | 791 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 200 curve and line segments |
Measured from the file. PNG: 1,083 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.52 × 1 in (13 × 25 mm) | 0.79 mm | 201 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.05 × 2 in (27 × 51 mm) | 1.6 mm | 402 mm | 45 | Vinyl, card and thin sheet |
| 1.57 × 3 in (40 × 76 mm) | 2.4 mm | 603 mm | 18 | Vinyl, card and thin sheet |
| 2.09 × 4 in (53 × 102 mm) | 3.1 mm | 804 mm | 10 | Any material, including 3 mm wood and acrylic |
| 3.14 × 6 in (80 × 152 mm) | 4.7 mm | 1,205 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.18 × 8 in (106 × 203 mm) | 6.3 mm | 1,607 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.28 × 12 in (159 × 305 mm) | 9.4 mm | 2,411 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D snowflake SVG files
-
3D snowflake ornaments: two on one sheet Solid · 4 pieces -
3D snowflake arm from a slit square Solid · one piece -
3D snowflake to fold into relief Solid · one piece -
3D snowflake ball from folded halves Solid · one piece -
3D snowflake on a slotted stand Solid · 2 pieces -
3D snowflake arm to print and cut by hand Outline · 7 pieces -
3D snowflake in three stacked layers Layered · 3 pieces -
3D snowflake in two slotted pieces Solid · 2 pieces
← 3D snowflake in three slotted pieces All 10 3D snowflakes 3D snowflake ornaments: two on one sheet →