3D snowflake ball from folded halves SVG
A lacy snowflake with a fold line cut down its upright axis. Cut four, fold each in half and glue the halves back to back, one to the next, until the last meets the first: eight vanes that look like a whole snowflake from every side. Cut 110 mm tall, the ball is 95 mm wide.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 88 × 100 mm (3.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 1,227 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 248 curve and line segments |
| Symmetry | 2-fold rotation and mirror |
Measured from the file. PNG: 1,760 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.88 × 1 in (22 × 25 mm) | 0.76 mm | 312 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.75 × 2 in (44 × 51 mm) | 1.5 mm | 623 mm | 30 | Vinyl, card and thin sheet |
| 2.63 × 3 in (67 × 76 mm) | 2.3 mm | 935 mm | 12 | Vinyl, card and thin sheet |
| 3.5 × 4 in (89 × 102 mm) | 3 mm | 1,247 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.25 × 6 in (133 × 152 mm) | 4.6 mm | 1,870 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7 × 8 in (178 × 203 mm) | 6.1 mm | 2,493 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.5 × 12 in (267 × 305 mm) | 9.1 mm | 3,740 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D snowflake SVG files
-
3D snowflake on a slotted stand Solid · 2 pieces -
3D snowflake arm to print and cut by hand Outline · 7 pieces -
3D snowflake in three stacked layers Layered · 3 pieces -
3D snowflake in two slotted pieces Solid · 2 pieces -
3D snowflake in three slotted pieces Solid · 3 pieces -
Simple 3D snowflake for small hands Solid · 2 pieces -
3D snowflake ornaments: two on one sheet Solid · 4 pieces -
3D snowflake arm from a slit square Solid · one piece
← 3D snowflake to fold into relief All 10 3D snowflakes 3D snowflake on a slotted stand →