3D snowflake arm to print and cut by hand SVG
The slit square as a drawing for scissors or a craft knife: cut along every line inside the square and stop where the lines stop, so each nested square stays joined at two corners. Print six on 100 gsm paper, 150 mm square or larger, then roll, tape and join them.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 8: 7 outer edges and 1 cut-out |
| Cut length | 1,928 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 44 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.33 mm | 490 mm | 100 | Too fine for most machines |
| 2 × 2 in (51 × 51 mm) | 0.66 mm | 979 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 3 in (76 × 76 mm) | 0.99 mm | 1,469 mm | 9 | Fine detail: vinyl and paper only, weed with care |
| 4 × 4 in (102 × 102 mm) | 1.3 mm | 1,959 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 2 mm | 2,938 mm | 1 | Vinyl, card and thin sheet |
| 8 × 8 in (203 × 203 mm) | 2.6 mm | 3,918 mm | 1 | Vinyl, card and thin sheet |
| 12 × 12 in (305 × 305 mm) | 4 mm | 5,877 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D snowflake SVG files
-
3D snowflake in three stacked layers Layered · 3 pieces -
3D snowflake in two slotted pieces Solid · 2 pieces -
3D snowflake in three slotted pieces Solid · 3 pieces -
Simple 3D snowflake for small hands Solid · 2 pieces -
3D snowflake ornaments: two on one sheet Solid · 4 pieces -
3D snowflake arm from a slit square Solid · one piece -
3D snowflake to fold into relief Solid · one piece -
3D snowflake ball from folded halves Solid · one piece
← 3D snowflake on a slotted stand All 10 3D snowflakes 3D snowflake in three stacked layers →