3D snowflake on a slotted stand SVG
A snowflake with a tab under its bottom arm and an oval base with a slot. Push the tab through the slot, fold it over underneath and glue it: the snowflake stands on a shelf. Cut 160 mm tall, it is 112 mm across and the slot is 1.0 mm wide, for card or 1 mm board. Loose pieces.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 75 × 100 mm (2.96 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 3: 2 outer edges and 1 cut-out |
| Cut length | 863 mm at this size |
| Narrowest part | 4.5 mm at this size |
| Nodes | 162 curve and line segments |
Measured from the file. PNG: 1,521 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.75 × 1 in (19 × 25 mm) | 1.1 mm | 219 mm | 120 | Vinyl, card and thin sheet |
| 1.5 × 2 in (38 × 51 mm) | 2.3 mm | 438 mm | 35 | Vinyl, card and thin sheet |
| 2.25 × 3 in (57 × 76 mm) | 3.4 mm | 658 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3 × 4 in (76 × 102 mm) | 4.6 mm | 877 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.51 × 6 in (114 × 152 mm) | 6.9 mm | 1,315 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.01 × 8 in (153 × 203 mm) | 9.1 mm | 1,754 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.01 × 12 in (229 × 305 mm) | 14 mm | 2,630 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D snowflake SVG files
-
3D snowflake arm to print and cut by hand Outline · 7 pieces -
3D snowflake in three stacked layers Layered · 3 pieces -
3D snowflake in two slotted pieces Solid · 2 pieces -
3D snowflake in three slotted pieces Solid · 3 pieces -
Simple 3D snowflake for small hands Solid · 2 pieces -
3D snowflake ornaments: two on one sheet Solid · 4 pieces -
3D snowflake arm from a slit square Solid · one piece -
3D snowflake to fold into relief Solid · one piece
← 3D snowflake ball from folded halves All 10 3D snowflakes 3D snowflake arm to print and cut by hand →