3D snowflake in three stacked layers SVG
Three snowflakes to stack with foam pads between them: a lacy one at the back, a plainer one turned thirty degrees over it and a small one on top. Each layer is one piece. The depth comes from the pads, so it works in vinyl-thin card as well as in wood.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 88 × 100 mm (3.44 × 3.94 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 3 outlines |
| Cut length | 1,968 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 336 curve and line segments |
| Layers | 3: back, middle and front |
| Also found as | Layered snowflake SVG |
Measured from the file. PNG: 1,760 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.88 × 1 in (22 × 25 mm) | Over 1.5 mm | 500 mm | 110 | Vinyl, card and thin sheet |
| 1.75 × 2 in (44 × 51 mm) | Over 3 mm | 1,000 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.63 × 3 in (67 × 76 mm) | Over 4.6 mm | 1,500 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.5 × 4 in (89 × 102 mm) | Over 6.1 mm | 1,999 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.25 × 6 in (133 × 152 mm) | Over 9.1 mm | 2,999 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7 × 8 in (178 × 203 mm) | Over 12 mm | 3,999 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.5 × 12 in (267 × 305 mm) | Over 18 mm | 5,998 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D snowflake SVG files
-
3D snowflake in two slotted pieces Solid · 2 pieces -
3D snowflake in three slotted pieces Solid · 3 pieces -
Simple 3D snowflake for small hands Solid · 2 pieces -
3D snowflake ornaments: two on one sheet Solid · 4 pieces -
3D snowflake arm from a slit square Solid · one piece -
3D snowflake to fold into relief Solid · one piece -
3D snowflake ball from folded halves Solid · one piece -
3D snowflake on a slotted stand Solid · 2 pieces
← 3D snowflake arm to print and cut by hand All 10 3D snowflakes 3D snowflake in two slotted pieces →