3D bow from figure of eight strips SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The stick-on bow of gift shops: eight strips in three lengths and a short one for the middle. Bring both ends of a strip to the notches at its middle with a half twist, glue, and stack them like spokes. Cut 200 mm wide, the bow is up to 100 mm across. Loose pieces.
What is in the file
| Size | 100 × 91 mm (3.94 × 3.56 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 9 outlines |
| Cut length | 1,586 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 102 curve and line segments |
| Also found as | Gift bow SVG |
Measured from the file. PNG: 2,000 × 1,817 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.91 in (25 × 23 mm) | 0.86 mm | 403 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.81 in (51 × 46 mm) | 1.7 mm | 806 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.71 in (76 × 69 mm) | 2.6 mm | 1,209 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.62 in (102 × 92 mm) | 3.5 mm | 1,611 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.43 in (152 × 138 mm) | 5.2 mm | 2,417 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.24 in (203 × 184 mm) | 6.9 mm | 3,223 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.86 in (305 × 276 mm) | 10 mm | 4,834 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
3D bow of ribbon loops with a knot Solid · 4 pieces -
3D bow with curling tails Solid · 7 pieces -
Three mini 3D bows for tags Solid · 6 pieces -
3D bow to print and cut by hand Outline · 3 pieces -
3D bow made up, in four colours Layered · 4 pieces -
Pom-pom 3D bow in three rounds Solid · 4 pieces -
Six-loop 3D bow in two rounds Solid · 3 pieces -
Pointed 3D bow with twenty loops Solid · 3 pieces
← Pointed 3D bow with twenty loops All 9 3D bows 3D bow of ribbon loops with a knot →