Pom-pom 3D bow in three rounds SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A gift bow of 24 loops: three rounds of eight arms and a ring for the middle. Bend each arm over and glue its tip on the hub, where the eight tips fit like slices of a cake, then stack the rounds over the gaps. Cut 225 mm wide, the bow is up to 63 mm across. Loose pieces.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.06 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 4 outlines |
| Cut length | 978 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 248 curve and line segments |
Measured from the file. PNG: 2,000 × 1,573 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.64 mm | 248 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.56 in (51 × 40 mm) | 1.3 mm | 497 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.33 in (76 × 59 mm) | 1.9 mm | 745 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.11 in (102 × 79 mm) | 2.5 mm | 994 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.67 in (152 × 119 mm) | 3.8 mm | 1,490 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.22 in (203 × 158 mm) | 5.1 mm | 1,987 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.34 in (305 × 237 mm) | 7.6 mm | 2,981 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
Six-loop 3D bow in two rounds Solid · 3 pieces -
Pointed 3D bow with twenty loops Solid · 3 pieces -
3D bow from figure of eight strips Solid · 9 pieces -
3D bow of ribbon loops with a knot Solid · 4 pieces -
3D bow with curling tails Solid · 7 pieces -
Three mini 3D bows for tags Solid · 6 pieces -
3D bow to print and cut by hand Outline · 3 pieces -
3D bow made up, in four colours Layered · 4 pieces
← 3D bow made up, in four colours All 9 3D bows Six-loop 3D bow in two rounds →