3D bow with curling tails SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two rounds of eight loops and a ring, with four forked tails 150 mm long at this size. Draw each tail over the blade of a pair of scissors to curl it, and glue the tails under the bow before you stick it down. Cut 230 mm wide, the bow is up to 50 mm across. Loose pieces.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.8 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 7 outlines |
| Cut length | 1,140 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 188 curve and line segments |
Measured from the file. PNG: 2,000 × 1,442 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 0.61 mm | 290 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.42 in (51 × 36 mm) | 1.2 mm | 579 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.13 in (76 × 54 mm) | 1.8 mm | 869 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.84 in (102 × 72 mm) | 2.4 mm | 1,158 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.26 in (152 × 108 mm) | 3.7 mm | 1,737 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.68 in (203 × 144 mm) | 4.9 mm | 2,316 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.52 in (305 × 216 mm) | 7.3 mm | 3,475 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
Three mini 3D bows for tags Solid · 6 pieces -
3D bow to print and cut by hand Outline · 3 pieces -
3D bow made up, in four colours Layered · 4 pieces -
Pom-pom 3D bow in three rounds Solid · 4 pieces -
Six-loop 3D bow in two rounds Solid · 3 pieces -
Pointed 3D bow with twenty loops Solid · 3 pieces -
3D bow from figure of eight strips Solid · 9 pieces -
3D bow of ribbon loops with a knot Solid · 4 pieces
← 3D bow of ribbon loops with a knot All 9 3D bows Three mini 3D bows for tags →