3D bow to print and cut by hand SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The pointed bow as a drawing: two rounds of ten arms in outline, with a dashed line across each arm where it is pinched. Print it 280 mm wide on coloured paper and cut it out with scissors; the points and the hub corners are easy to follow by hand.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.36 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 16: 3 outer edges and 13 cut-outs |
| Cut length | 1,590 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 351 curve and line segments |
Measured from the file. PNG: 2,000 × 1,229 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.3 mm | 404 mm | 150 | Too fine for most machines |
| 2 × 1.2 in (51 × 30 mm) | 0.61 mm | 808 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.8 in (76 × 46 mm) | 0.91 mm | 1,212 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.4 in (102 × 61 mm) | 1.2 mm | 1,615 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.59 in (152 × 91 mm) | 1.8 mm | 2,423 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.79 in (203 × 122 mm) | 2.4 mm | 3,231 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.19 in (305 × 183 mm) | 3.7 mm | 4,846 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
3D bow made up, in four colours Layered · 4 pieces -
Pom-pom 3D bow in three rounds Solid · 4 pieces -
Six-loop 3D bow in two rounds Solid · 3 pieces -
Pointed 3D bow with twenty loops Solid · 3 pieces -
3D bow from figure of eight strips Solid · 9 pieces -
3D bow of ribbon loops with a knot Solid · 4 pieces -
3D bow with curling tails Solid · 7 pieces -
Three mini 3D bows for tags Solid · 6 pieces
← Three mini 3D bows for tags All 9 3D bows 3D bow made up, in four colours →