Six-loop 3D bow in two rounds SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A big, soft bow from two pieces: a round of six wide arms, a smaller round to glue inside it half a step round, and a button for the middle. Cut 280 mm wide, the outer loops are 30 mm wide and the bow is up to 90 mm across. Loose pieces.
What is in the file
| Size | 100 × 65 mm (3.94 × 2.54 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 3 outlines |
| Cut length | 601 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 124 curve and line segments |
Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.65 in (25 × 16 mm) | 0.89 mm | 153 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.29 in (51 × 33 mm) | 1.8 mm | 305 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.94 in (76 × 49 mm) | 2.7 mm | 458 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.58 in (102 × 66 mm) | 3.6 mm | 611 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.88 in (152 × 98 mm) | 5.3 mm | 916 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.17 in (203 × 131 mm) | 7.1 mm | 1,221 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.75 in (305 × 197 mm) | 11 mm | 1,832 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
Pointed 3D bow with twenty loops Solid · 3 pieces -
3D bow from figure of eight strips Solid · 9 pieces -
3D bow of ribbon loops with a knot Solid · 4 pieces -
3D bow with curling tails Solid · 7 pieces -
Three mini 3D bows for tags Solid · 6 pieces -
3D bow to print and cut by hand Outline · 3 pieces -
3D bow made up, in four colours Layered · 4 pieces -
Pom-pom 3D bow in three rounds Solid · 4 pieces
← Pom-pom 3D bow in three rounds All 9 3D bows Pointed 3D bow with twenty loops →