3D bow of ribbon loops with a knot SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A flat ribbon bow for the lid of a box: two loop strips, a strip of forked tails and a knot. Fold both ends of each loop strip to its middle, pinch along the three fold lines and wrap the knot round. Cut 210 mm wide, the bow is 97 mm wide and 30 mm tall. Loose pieces.
What is in the file
| Size | 100 × 57 mm (3.94 × 2.25 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 13: 4 outer edges and 9 cut-outs |
| Cut length | 802 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 66 curve and line segments |
| Also found as | Paper bow SVG |
Measured from the file. PNG: 2,000 × 1,175 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.57 in (25 × 15 mm) | 0.86 mm | 204 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.14 in (51 × 29 mm) | 1.7 mm | 407 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.71 in (76 × 44 mm) | 2.6 mm | 611 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.28 in (102 × 58 mm) | 3.5 mm | 815 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.43 in (152 × 87 mm) | 5.2 mm | 1,222 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.57 in (203 × 116 mm) | 6.9 mm | 1,630 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.85 in (305 × 174 mm) | 10 mm | 2,444 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
3D bow with curling tails Solid · 7 pieces -
Three mini 3D bows for tags Solid · 6 pieces -
3D bow to print and cut by hand Outline · 3 pieces -
3D bow made up, in four colours Layered · 4 pieces -
Pom-pom 3D bow in three rounds Solid · 4 pieces -
Six-loop 3D bow in two rounds Solid · 3 pieces -
Pointed 3D bow with twenty loops Solid · 3 pieces -
3D bow from figure of eight strips Solid · 9 pieces
← 3D bow from figure of eight strips All 9 3D bows 3D bow with curling tails →