Three mini 3D bows for tags SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three small six-loop bows on one sheet, each with a button for its middle: for gift tags, cards and the necks of bottles. Cut 205 mm tall, each bow is up to 50 mm across, and the sheet fits A4 or Letter paper. Loose pieces.
What is in the file
| Size | 87 × 100 mm (3.42 × 3.94 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 6 outlines |
| Cut length | 845 mm at this size |
| Narrowest part | 4 mm at this size |
| Nodes | 192 curve and line segments |
Measured from the file. PNG: 1,748 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.87 × 1 in (22 × 25 mm) | 1 mm | 215 mm | 110 | Vinyl, card and thin sheet |
| 1.74 × 2 in (44 × 51 mm) | 2 mm | 429 mm | 30 | Vinyl, card and thin sheet |
| 2.61 × 3 in (66 × 76 mm) | 3 mm | 644 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.48 × 4 in (88 × 102 mm) | 4.1 mm | 859 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.21 × 6 in (132 × 152 mm) | 6.1 mm | 1,288 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.95 × 8 in (177 × 203 mm) | 8.1 mm | 1,717 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.43 × 12 in (265 × 305 mm) | 12 mm | 2,576 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More 3D bow SVG files
-
3D bow to print and cut by hand Outline · 3 pieces -
3D bow made up, in four colours Layered · 4 pieces -
Pom-pom 3D bow in three rounds Solid · 4 pieces -
Six-loop 3D bow in two rounds Solid · 3 pieces -
Pointed 3D bow with twenty loops Solid · 3 pieces -
3D bow from figure of eight strips Solid · 9 pieces -
3D bow of ribbon loops with a knot Solid · 4 pieces -
3D bow with curling tails Solid · 7 pieces
← 3D bow with curling tails All 9 3D bows 3D bow to print and cut by hand →