Wood engraving template for a family sign SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A clear band 19 mm tall for a surname, between two bars with a post at each end, with a crest of two leafy sprigs and a small heart above it and the same below. One piece, 100 by 45 mm.
What is in the file
| Size | 100 × 45 mm (3.94 × 1.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 26: 1 outer edge and 25 cut-outs |
| Cut length | 1,041 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 289 curve and line segments |
| Symmetry | Mirror |
| Also found as | Wood engraving patterns SVG |
Measured from the file. PNG: 2,000 × 938 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.45 in (25 × 11 mm) | 0.51 mm | 264 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.9 in (51 × 23 mm) | 1 mm | 529 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.34 in (76 × 34 mm) | 1.5 mm | 793 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.79 in (102 × 46 mm) | 2 mm | 1,058 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.69 in (152 × 68 mm) | 3 mm | 1,586 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.58 in (203 × 91 mm) | 4.1 mm | 2,115 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.38 in (305 × 137 mm) | 6.1 mm | 3,173 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wood engraving template SVG files
-
Wood engraving template for a heart plaque Solid · one piece -
Wood engraving template as a stencil plate Solid · one piece -
Wood engraving template as a border stencil Solid · one piece -
Wood engraving template for a cutting board Outline · 6 pieces -
Wood engraving template for a round coaster Solid · one piece -
Wood engraving template for a square coaster Solid · one piece -
Wood engraving template for a plaque Solid · one piece -
Wood engraving template for an oval plaque Solid · one piece
← Wood engraving template with an anchor All 15 wood engraving templates Wood engraving template for a heart plaque →